CA Technologies USA

CA Technologies USA
Can-Am X3 Front Suspension Limit Strap System
$465.00
We produce a quality solid Billet aluminum radius rod to replace the weak factory pieces. Our rods are machined from a solid piece of 1.25 Billet hex aluminum. That's right one and a quarter inch of solid Billet aluminum. These rods are larger than majority of similar products on the market, and sure to stand up to the abuse.
CA Technologies USA
Can-Am X3 Billet Rear Radius Straight Rod Set
$850.00
CA Technologies USA
CATechUSA - X3 Wheel Bearing Grease Tool (all models - 39mm)
$49.99
CA Technologies USA
Can-Am X3 Billet Rear Sway Bar Link Set
$225.00
Can-Am X3 Oil Fill Adapter Tool Simply use the aluminum adapter, thread it into the oil fill tube where the stock X3 oil cap is, attached the supplied hose, run to an easy to acces location and use your favorite funnel in the hose to fill your X3 with oil. When your done just detach the hose from the adapter, unthread it, and use your OEM cap to check oil levels as detailed in your owners manual. It's really that easy.
CA Technologies USA
Can-Am X3 Oil Fill Adapter Tool
$39.95
CA Technologies USA
CATechUSA - RZR 900 1000 Turbo S Wheel Bearing Grease Tool 44mm
$49.99
Sold Out
CATechUSA - Polaris 40mm Wheel Bearing Grease Tool This tool is designed to add the ability to grease your wheel bearings without requiring removal of the axles and or entire hub assembly. Our tools are proudly 100% designed and produced here in the U.S.A. with U.S.A materials
CA Technologies USA
CATechUSA - Polaris 40mm Wheel Bearing Grease Tool
$49.99
CA Tech USA Radius Rods are Arched in the middle and lower Radius Rods increases ride height without changing ride geometry. Giving you the most clearance possible, without negatively affecting stability. 1.25" thick billet aircraft aluminum ensures strength & dependability when you need it most. We utilize ONLY industry leading FK Brand Spherical bearings equipped with a cloth PTFE liner for maximum durability. No substitutions accepted.
CA Technologies USA
Can-Am X3 Billet High Clearance Radius Rods
$1,300.00
Polaris RZR XP1000 / Turbo Pull Plate / Radius Rod Plate Our Pull plate is machined from a solid piece of aircraft grade 6061 T-6 1.5"x 8" Aluminum bar stock. We then machine both pieces, send them out for anodize and then round all of our corners to give it a look that really pops and will wow anyone
CA Technologies USA
Polaris RZR XP1000 / Turbo Pull Plate / Radius Rod Plate
$174.00
CA Technologies USA
Can-Am X3 Billet Aluminum Shock Tower Kit
$360.00
CA Technologies USA
Can-Am X3 Heavy Duty 300M Ball Joints
from $295.00
Can-Am X3 Differential Fill Adapter Tool Use the aluminum adapter, thread it into the fluid fill plug where the stock X3 plug is, attach the supplied hose, run to an easy to accessible location and use your favorite funnel in the hose to fill your X3 with fluid. When your done just detach the hose from the adapter, unthread it, and reinstall the plug. It's really that easy.
CA Technologies USA
Can-Am X3 Differential Fill Adapter Tool
$34.95
CA Technologies USA
Can-Am X3 Billet Shift Knob
$59.95
Can-Am X3 Billet Tie Rod Our rods feature our signature ceramic based hard coat anodize for increased wear resistance, as well as the absolute best heim joints on the market the FK JMX rod ends. In steering components especially we only use the best of the best and do not give options of the KMX heims as we do with other components.
CA Technologies USA
Can-Am X3 Billet Tie Rods
$225.00
CA Technologies USA
Polaris RZR Heavy Duty 300M Ball Joints
from $295.00
CA Technologies USA
Honda Talon Gear Selector Shift Gate
$59.95
Polaris RZR High Clearance Rear Radius Rods - Billet Aluminum
CA Technologies USA
Polaris RZR High Clearance Rear Radius Rods - Billet Aluminum
$650.00
Polaris RZR Turbo S High Clearance Rear Radius Rods Our high clearance rods were designed with strength, dependability, and affordability all in mind. Our rods finish in the absolute largest rods on the market. We have a finished thickness of 1.25 inches throughout the entire center of the rod where it really counts, and a finished height of the rod at over 1.5 inches.
CA Technologies USA
Polaris RZR Turbo S High Clearance Rear Radius Rods
$849.95
Polaris RZR Turbo S Billet Rear Pull Plate / Radius Rod Plate When we thought up the interchangeable pull plate, we were greeted with overwhelming success and a real game changer solution for many people in the market. However, we still had a vast majority of people who just simply wanted a more basic and affordable option. They didn't need the versatility that came with our interchangeable plate
CA Technologies USA
Polaris RZR Turbo S Billet Rear Pull Plate / Radius Rod Plate
$174.95
Honda Talon Wheel Bearing Grease Tool 40mm This tool is designed to add the ability to grease your wheel bearings WITHOUT requiring removal of the axles and or entire hub assembly. This tool fits ALL Models of the Honda Talon. No exclusions.
CA Technologies USA
Honda Talon Wheel Bearing Grease Tool 40mm
$49.99
CA Technologies USA
Can-Am X3 Rear Sway Bar Mount
$69.95
CA Technologies USA
Honda Talon High Clearance Radius Rods | CA Tech USA
$750.00
CA Technologies USA
Honda Talon Rear Pull Plate / Radius Rod Plate
$265.00
CA Technologies USA
Honda Talon Billet Rear Sway Bar Link Set
$275.00
CA Technologies USA
Can-Am X3 Rear Limit Straps
$115.00
CA Technologies USA
Honda Talon Billet Tie Rods
$265.00
CA Technologies USA
Honda Talon Under Hood Battery Tray
$64.95
Can-Am Maverick X3 Upper Boxed Control Arms are laser cut from 4130 chromoly then CNC broke for quality and accuracy. Comes complete with 25% larger bushings installed to decrease wear and increase bushing life. Made with TIVAR® a high quality UHMW-PE material and is resistant to most all chemicals and conditions.
CA Technologies USA
Can-Am X3 Upper Boxed Control Arms
$1,025.00
Can-Am Maverick X3 Lower Boxed Control Arms are laser cut from 4130 chromoly then CNC broke for quality and accuracy. Comes complete with 25% larger bushings installed to decrease wear and increase bushing life. Made with TIVAR® a high quality UHMW-PE material and is resistant to most all chemicals and conditions.
CA Technologies USA
Can-Am X3 Lower Boxed Control Arms
$1,025.00
CA Technologies USA
Can-Am X3 Front Double Shear Gusset Kit
$350.00
Sold Out
Honda Talon Sway Bar Mount The OEM mount can and does break in the center due to thin and cheap material. Also due to tolerance issues there can be play in between the bushing and mount causing excess movement which leads to wear. We have worked to achieve a better tolerance fit around the bushing as well as we machine the holes to accommodate a tighter fit on the mounting bolt to reduce movement there as well.
CA Technologies USA
Honda Talon Sway Bar Mount
$69.95
CA Technologies USA
Can-Am X3 Shift Gate
$59.95
Sale
Polaris RZR Pro XP Door Panel Inserts Make your ride easier on your legs and knees with a set of our Polaris RZR Pro XP Door Panel Inserts. Provides protection from trail debris and mud coming into the side and floorboard area of the cab.
CA Technologies USA
Polaris RZR Pro XP Door Panel Inserts
$149.95 $119.96 Save 20%
CA Tech USA Cam-Am X3 High Clearance Radius Rods are the largest and thickest rods on the market providing strength, dependability, and affordability. 1.25 inches thick and 1.5 inches high. Built with FK Brand Spherical bearings. Kit contains four high clearance rods for the highest ground clearance.
CA Technologies USA
Can-Am X3 Billet High Clearance Middle and Lower Radius Rods
$1,000.00
Sold Out
CA Technologies USA
12" CA Tech Logo Sticker
$6.99
Honda Talon X and R Billet High Clearance Radius Rods | CA Tech USA Our high clearance rods were designed with strength, dependability, and affordability all in mind. Our rods finish in the absolute largest rods on the market. We have a finished thickness of 1.25 inches throughout the entire center of the rod where it really counts, and a finished height of the rod at over 1.5 inches. Our rods also boast a full 3 INCHES OF ADDED GROUND CLEARANCE
CA Technologies USA
Honda Talon High Clearance UPPER Radius Rods
$275.00
Honda Talon X and R Billet High Clearance Radius Rods | CA Tech USA Our high clearance rods were designed with strength, dependability, and affordability all in mind. Our rods finish in the absolute largest rods on the market. We have a finished thickness of 1.25 inches throughout the entire center of the rod where it really counts, and a finished height of the rod at over 1.5 inches. Our rods also boast a full 3 INCHES OF ADDED GROUND CLEARANCE
CA Technologies USA
Honda Talon High Clearance Radius Rods (Lower Rods Only)
$525.00
Honda Talon Hitch Receiver Plate is made from ¼” inch Laser Quality HRPO Steel and receives a 2” hitch tube. The fully welded bracing design gives it the strength to take a beating over and over. Powder coated to protect from rust and corrosion. Easy installation. Fits All Honda Talon models Receives a 2” Hitch Tube
CA Technologies USA
Honda Talon Hitch Receiver Plate
$170.00
We utilize ONLY industry leading FK Brand Spherical bearings equipped with a cloth PTFE liner for durability on the high clearance lower rods and use FK brand JMX heims on the upper rods. There is no better joint to use on the planet. The Heims are spaced for your machine’s width so its bolt and go with little to no adjusting! Our rods are fully covered by a no hassle no BS warranty. If you damage a rod, we guarantee to replace it no questions asked, at all.
CA Technologies USA
Polaris RZR UPPER Radius Rods for XP 1000, XP Turbo, XP4 1000
$225.00
CA Technologies USA
Can-Am X3 Billet High Clearance UPPER Radius Rods
$350.00
Our high clearance rods were designed with strength, dependability, and affordability all in mind. Our rods finish in the absolute largest rods on the market. We have a finished thickness of 1.25 inches throughout the entire center of the rod where it really counts, and a finished height of the rod at over 1.5 inches. Making these the absolute thickest rod on the market. Our rods also boast a full 3 INCHES OF ADDED GROUND CLEARANCE!! So take the washed out trail with confidence in mind.
CA Technologies USA
Polaris RZR High Clearance Radius Rods (LOWER)
$425.00
CA Technologies USA
Honda Talon R Lower Control Arms
$1,085.00
CA Technologies USA
Honda Talon R Upper Control Arms
$1,085.00
Can-Am X3 Billet Rear Radius Rod Set We produce a quality solid Billet aluminum radius rod to replace the weak factory pieces. Our rods are machined from a solid piece of 1.25 Billet hex aluminum. That's right one and a quarter inch of solid Billet aluminum. These rods are larger than majority of similar products on the market, and sure to stand up to the abuse.
CA Technologies USA
Can-Am X3 Billet Rear Radius Straight Rods (Middle and Lower Rods Only)
$550.00
CA Technologies USA
Polaris RZR Pro XP High Clearance Radius Rods
$639.95
CA Technologies USA
Polaris RZR Upper Control Arms
$895.95
We have overhauled and reinforced our previous generation of Boxed Trailing Arms to meet the demands of the ever-evolving UTV world. Adding further gusseting at high impact areas and increased overall structure to prevent failure. Whether you are a weekend warrior or a professional racer, we encourage you to equip your machine with the very best and leave the worrying at home while you focus on hitting the trails.
CA Technologies USA
Can-Am X3 72" Boxed Trailing Arms Gen 2
$2,800.00
CA Technologies USA
Polaris RZR Lower Control Arms
from $900.00
CA Technologies USA
Polaris RZR Pro XP UPPER Radius Rods
$239.95
CA Tech Pull Plate 3D scanned for perfect fitment and machined from 6061 aluminum with a finished thickness of 1" for maximum durability, the new 2022 Can-Am X3 pull plate is easy to install and built to last a lifetime. OEM color matching ensures all CA Tech parts will pair perfectly with your build.
CA Technologies USA
Can-Am X3 GEN 2 Pull Plate
$265.00