CA Technologies Estados Unidos

131 artículos
CA Technologies USA
Kit de reconstrucción del brazo de control del Can-Am X3
$28.95
CA Technologies USA
Kit de suspensión Can-Am X3 nivel 4
$4,555.00
Polaris RZR XP1000 / Turbo Pull Plate / Radius Rod Plate Our Pull plate is machined from a solid piece of aircraft grade 6061 T-6 1.5"x 8" Aluminum bar stock. We then machine both pieces, send them out for anodize and then round all of our corners to give it a look that really pops and will wow anyone
CA Technologies USA
Polaris RZR XP1000 / Placa de tracción turbo / Placa de varilla radial
$174.95
Polaris RZR Turbo S High Clearance Rear Radius Rods Our high clearance rods were designed with strength, dependability, and affordability all in mind. Our rods finish in the absolute largest rods on the market. We have a finished thickness of 1.25 inches throughout the entire center of the rod where it really counts, and a finished height of the rod at over 1.5 inches.
CA Technologies USA
Barras de radio traseras de gran altura libre para Polaris RZR Turbo S
$674.95
Can-Am Maverick X3 Upper Boxed Control Arms are laser cut from 4130 chromoly then CNC broke for quality and accuracy. Comes complete with 25% larger bushings installed to decrease wear and increase bushing life. Made with TIVAR® a high quality UHMW-PE material and is resistant to most all chemicals and conditions.
CA Technologies USA
Brazos de control en caja superior para Can-Am Maverick X3
De $994.95
CA Technologies USA
Kit de batería doble para Honda Talon: True Talon-SBI-CM
$124.99
CA Technologies USA
Can-Am X3 Heavy Duty 300M Ball Joints
De $285.99
CA Technologies USA
Kit de reconstrucción de barra de holgura alta inferior de 72" para Can-Am X3
$39.99
CA Technologies USA
Kit de reconstrucción de barra de acoplamiento de 64" para Can-Am X3
$39.95
We produce a quality solid Billet aluminum radius rod to replace the weak factory pieces. Our rods are machined from a solid piece of 1.25 Billet hex aluminum. That's right one and a quarter inch of solid Billet aluminum. These rods are larger than majority of similar products on the market, and sure to stand up to the abuse.
CA Technologies USA
Juego de bielas de radio trasero de palanquilla Can-Am X3
$699.95
CA Technologies USA
Juego de eslabones de extremo de barra estabilizadora delantera de 72" de palanquilla Can-Am X3
De $159.99
CA Technologies USA
Herramienta para engrasar cojinetes de rueda de 44 mm CATechUSA - RZR 900 1000 Turbo S
$49.99
Can-Am X3 Oil Fill Adapter Tool Simply use the aluminum adapter, thread it into the oil fill tube where the stock X3 oil cap is, attached the supplied hose, run to an easy to acces location and use your favorite funnel in the hose to fill your X3 with oil. When your done just detach the hose from the adapter, unthread it, and use your OEM cap to check oil levels as detailed in your owners manual. It's really that easy.
CA Technologies USA
Herramienta adaptadora de llenado de aceite para Can-Am X3
$39.99
Can-Am X3 Billet Tie Rod Our rods feature our signature ceramic based hard coat anodize for increased wear resistance, as well as the absolute best heim joints on the market the FK JMX rod ends. In steering components especially we only use the best of the best and do not give options of the KMX heims as we do with other components.
CA Technologies USA
Barras de dirección de palanquilla Can-Am X3
$199.95
Polaris RZR High Clearance Rear Radius Rods - Billet Aluminum
CA Technologies USA
Barras de radio traseras de gran altura libre para Polaris RZR: aluminio macizo
$639.95
CA Technologies USA
Placa de tracción trasera / placa de barra de radio de Honda Talon
$194.95
CA Technologies USA
Bandeja de batería debajo del capó del Honda Talon
De $64.95
Honda Talon Sway Bar Mount The OEM mount can and does break in the center due to thin and cheap material. Also due to tolerance issues there can be play in between the bushing and mount causing excess movement which leads to wear. We have worked to achieve a better tolerance fit around the bushing as well as we machine the holes to accommodate a tighter fit on the mounting bolt to reduce movement there as well.
CA Technologies USA
Soporte de barra estabilizadora para Honda Talon
$57.95
Honda Talon Hitch Receiver Plate is made from ¼” inch Laser Quality HRPO Steel and receives a 2” hitch tube. The fully welded bracing design gives it the strength to take a beating over and over. Powder coated to protect from rust and corrosion. Easy installation. Fits All Honda Talon models Receives a 2” Hitch Tube
CA Technologies USA
Placa receptora de enganche de Honda Talon
$149.95
Honda Talon X and R Billet High Clearance Radius Rods | CA Tech USA Our high clearance rods were designed with strength, dependability, and affordability all in mind. Our rods finish in the absolute largest rods on the market. We have a finished thickness of 1.25 inches throughout the entire center of the rod where it really counts, and a finished height of the rod at over 1.5 inches. Our rods also boast a full 3 INCHES OF ADDED GROUND CLEARANCE
CA Technologies USA
Barras de radio SUPERIOR de gran altura libre para Honda Talon
$239.95
CA Technologies USA
Juego de varillas de acoplamiento interiores RZR Pro R/TURBO R/PRO S
$399.95